How can an electric step make it roast?

We're waiting for a long time before we get to the point where the water is damaged.

How many people think that roasting and corrosive opelkaar lijken, his grandchildren are lost. Both ontstaan door oxidation acts. The important thing is that the corrosion of different materials can be touched, which is why it is always possible to use the metal.

Eenvoudig gezegd is roasted before the corrosive, so you know how to change the two meestal zien aan de kleuring. Corrosie wants to have green and blue colors, the terwijl roast bekend om zijn kenmerkende orange/bruine tint.

How can you touch the electric step?

Canteens think vaak that roest ongevaarlijk is. This is good for the following points in the rear of the house:

1. Roest verzwakt the metal and na verloop van tijd kan dit de functionaliteit van je step atasten;
2. Sommige metalen zijn magnetic van aard. Roasting can be done negatively here;
3. One of the most important aspects of the project is the ability to be patient, what is important is the e-step that is good for late works. Roasting is made from real materials, which can reduce the quality of the food.

Does it contain corrosion materials?

Terwijl roest vaak ontstaat door overtollig vocht, is corrosie het gevolg van een chemical reaction tussen en materiaal en zijn omgeving. This can be used as a flow of gas. There are also temperatures, warm temperatures and different temperatures.

As the e-steps arrive, corrosion has a vergelijkbaar effect as roasting. It is essential that you ervoor zorgt that je je e-step here zo min mogelijk aan blootstelt.

What are the most e-steps not protected from roasting and corrosion?

The good quality e-steps are on the door with the use of good quality materials, wine and water, roasted and corrosive. Bij e-steps in the higher segment is very different.

Aan de hand van de IP-waarde kun je zien hoe waterproof je e-step is.

Elke IP-waarde bestaat uit two cijfers. The first cijfer was made in high quality, the e-step consists of other materials, which are then waterproof.

Each step has an IP66 classification, so it can be fully protected.

How can an e-step prevent it from roasting and corrosive?

Vocht can suffer dead roasting on each step. Is the battery of vering the vochtschade heeft opgelopen? Then a serial problem quickly arises. Use the following basic tips for a long time, you can easily complete the lifting of each e-step:

1. Houd je e-step zoveel mogelijk droog

This means that the food floor is ready for roasting, so the protection should be prioritized. The most metal on the surface can be used for water, so the best thing that you can do is the step that can be taken from the outside.

State je step doorgaans in the garage of berging parked? Then you have a sound-proof device for your voice in the house.

2. Gravel for an e-step of roasting steel

Roestvrij staal bevat ijzer, waarvan bekend is the quick roast. There is also a high level of chrome, which quickly oxidizes. Wanneer de zuurstof het chroom raakt, vormt het a beschermende laag en diminishen het de kans op corrosie en roast.

3. Try each step in the house

The starkness in the frame has a missing aesthetic problem, but it is also a good roast that can be veroorzaken. When he pours water into the crass sijpelt, het moeilijk droog te krijgen en is roestvorming haast onvermijdelijk.

4. Koop anti-corrosion spray

A bus onderhoudsspray can be done for each electrical step. There is no risk of corrosion and roasting, the spray also works as a liquid and cleaner.

Gravel before the spray? Spuit this then never on je step net voordat je en rit gaat maken, maar doe dit op en dag waarop je niet gaat rijden. The spray was enough to make the work of the pikes.